LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Cobalt LS, 4D Sedan, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Heating, Ventilation And Air Conditioning) >> Climate Control >> General Troubleshooting Information >> How to Use the Self-diagnostic Function without the HDS >> Canceling the Self-diagnostic Function

Canceling the Self-diagnostic Function

WARNING: This page is about a different car, the 2011 Honda Insight and 2010 Honda Insight. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch to LOCK (0) to cancel the self-diagnostic function. After completing repair work, run the self-diagnostic function again to make sure that there are no other DTCs.