LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Cobalt LS, 4D Sedan, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Heating, Ventilation And Air Conditioning) >> Climate Control >> General Troubleshooting Information >> Check these items before using the sensor input display mode

Check these items before using the sensor input display mode

WARNING: This page is about a different car, the 2011 Honda Insight and 2010 Honda Insight. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch to ON (II), and check the recirculation door function; press the recirculation button to switch from FRESH to RECIRC. The air volume and sound should change slightly.
  2. Set the temperature control knob to the desired test temperature. When selecting the test temperature, note these items:
    • "Lo" temperature setting will default to MAX COOL, VENT, and RECIRC.
    • "Hi" temperature setting will default to MAX HOT, FLOOR, and FRESH.
    • 58 through 86°F (or 19 through 31°C) settings will use the automatic climate control logic.
  3. Turn the ignition switch to LOCK (0).
scientia non olet · About LEMON Manuals