LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Cobalt LS, 4D Sedan, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Heating, Ventilation And Air Conditioning) >> Climate Control >> Climate Control Unit Knob Replacement

Climate Control Unit Knob Replacement

WARNING: This page is about a different car, the 2011 Honda Insight and 2010 Honda Insight. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • Do not work in a dusty or dirty place.
  • Do not work with dusty hands.
  • Discharge static electricity from your body before and during the work.
  • Do not touch the circuit board(s) with your bare hands.
  1. Remove the climate control unit (see CLIMATE CONTROL UNIT REMOVAL/INSTALLATION ).
  2. Remove the knob (A).
    Fig 1: Removing Knob
    G06431369Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Install the knob in the reverse order of removal. After installation, operate the various functions to see whether it works properly.
  4. Run the self-diagnostic function to confirm that there are no problems in the system (see HOW TO USE THE SELF-DIAGNOSTIC FUNCTION WITHOUT THE HDS ).
scientia non olet · About LEMON Manuals