Blower Unit Component Replacement

WARNING: This page is about a different car, the 2011 Honda Insight and 2010 Honda Insight. However, it is still accessible from the selected car via links, so may be relevant.

Note these items when overhauling the blower unit:

The recirculation control motor (A), blower motor (B), and the dust and pollen filter (C) can be replaced without removing the blower unit.
Before reassembly, make sure that the recirculation control linkage and door move smoothly without binding.
After reassembly, make sure the recirculation control motor runs smoothly (see MODE CONTROL MOTOR REPLACEMENT ).

Fig 1: Identifying Recirculation Control Motor, Blower Motor And Dust And Pollen Filter
Courtesy of AMERICAN HONDA MOTOR CO., INC.