LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Cobalt LS, 4D Sedan, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Heating, Ventilation And Air Conditioning) >> Climate Control >> A/C Compressor Thermal Protector Replacement

A/C Compressor Thermal Protector Replacement

WARNING: This page is about a different car, the 2011 Honda Insight and 2010 Honda Insight. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the bolt and the holder (A). Disconnect the field coil connector (B), then remove the thermal protector (C).
    Fig 1: Field Coil Connector And Holder With Torque Specifications
    G06431406Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Replace the thermal protector (A) with a new one, and apply silicone sealant (B) to the bottom of the thermal protector.
    Fig 2: Applying Silicone Sealant To Bottom Of Thermal Protector
    G06431407Courtesy of AMERICAN HONDA MOTOR CO., INC.
    NOTE: Make sure not to get any silicone grease on the terminal part of the connectors and switches, especially if you have silicone grease on your hands or gloves.
  3. Install the thermal protector in the reverse order of removal.
scientia non olet · About LEMON Manuals