LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Cobalt LS, 4D Sedan, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Continuously Variable Transmission (CVT)) >> Lower Valve Body >> CVT Clutch Pressure Control Solenoid Valve Removal/Installation

CVT Clutch Pressure Control Solenoid Valve Removal/Installation

WARNING: This page is about a different car, the 2011 Honda Insight and 2010 Honda Insight. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the CVT clutch pressure control solenoid valve connector (A).
    Fig 1: CVT Clutch Pressure Control Solenoid Valve With Torque Specifications And Connector
    G06430328Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Remove the CVT clutch pressure control solenoid valve (B) (four bolts).
  3. Check that the filter (C) is in good condition, replace it if it is clogged or damaged.
  4. Install the CVT clutch pressure control solenoid valve (four bolts) with the two dowel pins (D) and the separator plate (E) on the lower valve body (F).
  5. Connect the CVT clutch pressure control solenoid valve connector.
scientia non olet · About LEMON Manuals