Water Outlet Removal and Installation: Removal

WARNING: This page is about a different car, the 2011 Honda Insight and 2010 Honda Insight. However, it is still accessible from the selected car via links, so may be relevant.

Drain the engine coolant (see COOLANT CHECK ).
Remove the air cleaner (see AIR CLEANER REMOVAL/INSTALLATION ).
Remove the harness holder mounting bolt (A) and the ground cable (B).

Fig 1: Identifying Harness Holder Mounting Bolt And Ground Cable With Harness Holder
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the harness holder (C).
Disconnect the upper radiator hose (A), the water bypass hose (B), and the heater hose (C).

Fig 2: Identifying Upper Radiator Hose, Water Bypass Hose And Heater Hose
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the water outlet.

Fig 3: Identifying Water Outlet
Courtesy of AMERICAN HONDA MOTOR CO., INC.