LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Cobalt LS, 4D Sedan, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Cooling System) >> Drive Belt Auto-tensioner Replacement

Drive Belt Auto-tensioner Replacement

WARNING: This page is about a different car, the 2011 Honda Insight and 2010 Honda Insight. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the drive belt (see DRIVE BELT INSPECTION  ).
  2. Remove the auto-tensioner.
    Fig 1: Auto-Tensioner With Torque Specification
    G06429113Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Install the auto-tensioner in the reverse order of removal.
scientia non olet · About LEMON Manuals