TPMS Reminder Reset - Procedure 06
WARNING: This page does not describe the selected car, but rather 254 other vehicles, including the 2025 Honda Odyssey, 2025 Honda HR-V, 2025 Honda Civic, 2025 Honda CR-V, and 2025 Honda Accord. However, it is still accessible from the selected car via links, so may be relevant.
Set the tire pressure of all wheels to pressure specified on the tire and loading information label. Make sure the vehicle is at a complete stop.
- For Manual transmission models: The shift lever is in "N".
- For CVT models: The shift lever is in "P".
- The power mode is ON.
Calibrate the system from the CUSTOMIZE SETTINGS menu on the multi-information display:
- Press the UP/DOWN ARROW buttons on the right side of steering wheel to select CUSTOMIZE SETTINGS, then press the SEL/RESET button to see TPMS CALIBRATION appears on the display. See Fig 1.
- Press the SEL/RESET button. The display switches to the customization setup screen to select CALIBRATE.
- Press the ARROW buttons and select CALIBRATE, then press the SEL/RESET button to see CALIBRATION STARTED screen appears, then the display returns to the customization menu screen.
- The calibration process finishes automatically.
NOTE:
If the CALIBRATION FAILED TO START message appears, repeat steps 2 and 3.