LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Cobalt LS, 4D Sedan, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Maintenance Reminder Light (Reset Procedures)) >> Engine Oil Replacement Reminder >> Engine Oil Replacement Reminder Reset - Procedure 23

Engine Oil Replacement Reminder Reset - Procedure 23

WARNING: This page does not describe the selected car, but rather 254 other vehicles, including the 2025 Honda Odyssey, 2025 Honda HR-V, 2025 Honda Civic, 2025 Honda CR-V, and 2025 Honda Accord. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • The vehicle must be stopped to reset the Maintenance Minder.
  • If a required service is done and the Maintenance Minder is not reset, or if the Maintenance Minder is reset without doing the service, the system will not show the proper maintenance timing. This can lead to serious mechanical problems because there will be no accurate record of when the required maintenance is needed.
  • You can reset all maintenance items by batch, or you can select and reset each maintenance item individually on the display.
  1. Turn the vehicle to the ON mode.
  2. Refer to the "How to access the current engine oil life," display the engine oil life on the multi-information display.
  3. Press and hold the multi-function steering wheel controller for 10 seconds or more to show the reset mode.
  4. If you reset all the maintenance items shown on the display "A23 (for example)", select "All due items" by rolling the multi-function steering wheel controller and press it. If you reset each maintenance item individually, select an item (complete list of maintenance main item(s) and sub item(s)) you wish to reset by rolling the multi-function steering wheel controller and press it.
    NOTE:
    • If you are resetting the Maintenance Minder when the engine oil life is more than 15 %, make sure any maintenance item(s) requiring service are done before resetting the display.
    • To cancel the reset mode, toggle the multi-function steering wheel controller to the left.
    G00611080
  5. "Reset completed" appears on the display and maintenance item code(s) will disappear. The engine oil life will reset to "100 %."