LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Cobalt LS, 4D Sedan, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Drum Brake System >> Repair Instructions >> Drum Brake Adjusting Hardware Replacement >> Removal Procedure

Removal Procedure

WARNING: Refer to Brake Dust Warning .
  1. Remove the brake drum. Refer to Brake Drum Replacement .
    2. Fig 1: Brake Adjuster Actuator Lever Spring
    GM2180668Courtesy of GENERAL MOTORS CORP.
  2. Remove the brake adjuster actuator lever spring (1).
    3. Fig 2: Brake Adjuster Actuator Lever
    GM2180674Courtesy of GENERAL MOTORS CORP.
  3. Remove the brake adjuster actuator lever (1).
    4. Fig 3: Brake Shoe Adjuster
    GM2180678Courtesy of GENERAL MOTORS CORP.
  4. Spread the top of the brake shoes apart slightly and remove the brake shoe adjuster (1).
  5. Inspect the drum brake adjusting hardware and replace any damaged components as necessary. Refer to Drum Brake Adjusting Hardware Inspection .
  6. Disassemble the brake shoe adjuster and thoroughly clean the adjuster screw threads of any corrosion.
scientia non olet · About LEMON Manuals