Installation Procedure
- Apply a light coat of high temperature brake lubricant to the brake shoe adjuster screw threads.
- Assemble the brake shoe adjuster, setting the adjuster to the fully retracted position.
Courtesy of GENERAL MOTORS CORP.
- Spread the top of the brake shoes apart slightly and install the brake shoe adjuster (1).
Courtesy of GENERAL MOTORS CORP.
- Install the brake adjuster actuator lever (1).
Courtesy of GENERAL MOTORS CORP.
- Install the brake adjuster actuator lever spring (1).
- Adjust the drum brakes. Refer to Drum Brake Adjustment .
- Install the brake drum. Refer to Brake Drum Replacement .