LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Cobalt LS, 4D Sedan, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Drum Brake System >> Repair Instructions >> Brake Drum Replacement >> Installation Procedure

Installation Procedure

  1. Using the J-42450-A:  Wheel Hub Resurfacing Kit, clean the wheel hub flange of any corrosion.
    2. Fig 1: Brake Drum
    GM2180649Courtesy of GENERAL MOTORS CORP.
  2. Install the brake drum (1).
  3. Adjust the drum brakes. Refer to Drum Brake Adjustment .
  4. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
  5. Apply the brakes 2 or 3 times to seat and center the brake shoes on the brake drum.
scientia non olet · About LEMON Manuals