Rear Bumper Fascia Bracket Replacement (Coupe)

Fig 1: View Of Rear Bumper Fascia Bracket (Coupe)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the rear bumper fascia. Refer to Rear Bumper Fascia Replacement (Sedan) or Rear Bumper Fascia Replacement (Coupe) .
1	Rear Bumper Fascia Center Bracket Nut (Qty: 5) CAUTION: Refer to Fastener Caution . Tighten: 2.5 N.m (22 lb in)
2	Rear Bumper Fascia Center Bracket
3	Rear Bumper Fascia Side Bracket Bolt (Qty: 4) Tighten: 2.5 N.m (22 lb ft)
4	Rear Bumper Fascia Side Bracket
5	Rear Bumper Fascia Upper Bracket Bolt (Qty: 4) Tighten: 2.5 N.m (22 lb in)
6	Rear Bumper Fascia Upper Bracket