LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Cobalt LS, 4D Sedan, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> Seat Hardware, Seat Trim, And Upholstery >> Repair Instructions >> Rear Split Folding Seat Back Replacement

Rear Split Folding Seat Back Replacement

Fig 1: Rear Split Folding Seat Back
GM2090167Courtesy of GENERAL MOTORS CORP.
Callout Component Name
1 Rear Split Folding Seat Back

Procedure

  1. Pull the release handles for the rear split folding seat backs located in the rear compartment.
  2. Fold down the rear seat.
  3. With a flat-bladed tool release the side retainer to disengage the rear seat.
  4. Lift up the seat and remove.
scientia non olet · About LEMON Manuals