Tail Lamp Replacement (Chevrolet, Pontiac Sedan)

Fig 1: Tail Lamp Assembly

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	Tail Lamp Nut (Qty: 2) Hand tighten the tail lamp nut only.
2	Tail Lamp Bolt (Qty: 2) CAUTION: Refer to Fastener Caution . Tighten: 1.5 N.m (13 lb in)
3	Tail Lamp Assembly Procedure Pull the lamp rearward from the rear end panel extension. Disconnect the electrical connector. Remove the tail lamp assembly from the rear end panel extension.

Callout

Component Name

Tail Lamp Nut (Qty: 2)
Hand tighten the tail lamp nut only.

Tail Lamp Bolt (Qty: 2)

CAUTION: Refer to Fastener Caution .

Tighten: 1.5 N.m (13 lb in)

Tail Lamp Assembly

Procedure