LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Camaro LS, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (Engine Controls And Fuel - 6.2L - DTC P0315 To DTC P1258) >> DTC P0601, P0602, P0603, P0604, P0606, P0607, P060D, P062F, or P2610 (ECM) >> Circuit/System Testing

Circuit/System Testing

WARNING: This page is about a different variant/trim than selected.
  1. Observe the DTC information with a scan tool.
    • If DTC P0602 is set, attempt to program the K20 ECM before replacing the K20 ECM. Refer to Control Module References for K20 ECM replacement, setup, and programming.
    • If DTC P0602 resets, replace the K20 ECM.
  2. Observe the DTC information with a scan tool. DTC P0601, P0603, P0604, P0605, P0606, P0607, P060D, P062F, or P2610 should not set.
    • If a DTC failed this ignition, replace the K20 ECM.
scientia non olet · About LEMON Manuals