LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Camaro LS, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (Engine Controls And Fuel - 6.2L - DTC P0010 To DTC P0308) >> DTC P0112 or P0113 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different variant/trim than selected.
  1. Engine running, observe the scan tool IAT Sensor parameter. The reading should be between -38 to +120°C (-38 to +248°F), depending on current ambient temperature and vehicle operation conditions.
  2. Operate the vehicle with the Conditions for Running the DTC to verify that the DTC does not reset. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records data.
scientia non olet · About LEMON Manuals