LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Camaro LS, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Engine Mechanical - 6.2L - Repair Instructions - On Vehicle) >> Oil Level Indicator Tube Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Oil Level Indicator
    GM651880Courtesy of GENERAL MOTORS CORP.
  1. Remove the oil level indicator.
    2. Fig 2: View Of Oil Level Indicator Tube
    GM651879Courtesy of GENERAL MOTORS CORP.
  2. Remove the oil level indicator tube bolt.
  3. Remove the oil level indicator tube.
    4. NOTE: Inspect the O-ring seal for cuts or damage. The O-ring seal may be reused if not cut or damaged.
  4. Remove the O-ring from the oil level indicator tube, if required.
scientia non olet · About LEMON Manuals