Camshaft Timing Chain and Sprocket Replacement (LS3): Notes

WARNING: This page is about a different variant/trim than selected.

Special Tools

EN 46330 Timing Chain Tensioner Retaining Pin. See Special Tools .
J 8433 Puller Bar. See Special Tools .
J 41478 Crankshaft Front Oil Seal Installer. See Special Tools .
J 41558 Crankshaft Sprocket Remover. See Special Tools .
J 41665 Crankshaft Balancer and Sprocket Installer
J 41816-2 Crankshaft End Protector. See Special Tools .
J 45059 Angle Meter