Fuel Pressure Sensor Replacement

WARNING: This page is about a different variant/trim than selected.

Fig 1: Fuel Pressure Sensor

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	Fuel Pressure Sensor Procedure Remove the sensor from the plastic retainer. Disconnect the quick connector. Refer to Plastic Collar Quick Connect Fitting Service . Disconnect the electrical connector.

Callout

Component Name

Preliminary Procedure:
Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .

Fuel Pressure Sensor

Procedure

Remove the sensor from the plastic retainer.
Disconnect the quick connector. Refer to Plastic Collar Quick Connect Fitting Service .
Disconnect the electrical connector.