LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Camaro LS, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Controls And Fuel - 6.2L - Repair Instructions) >> Repair Instructions >> Evaporative Emission Canister Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Vent Solenoid Electrical Connector & Evaporative Emission Hoses
    GM2188258Courtesy of GENERAL MOTORS CORP.
  1. Remove the rear suspension support. Refer to Rear Suspension Support Replacement .
  2. Disconnect the vent solenoid electrical connector (1).
  3. Disconnect the evaporative emission hoses (2). Refer to Plastic Collar Quick Connect Fitting Service .
    4. Fig 2: Evaporative Emission Canister & Fasteners
    GM2188273Courtesy of GENERAL MOTORS CORP.
  4. Remove the evaporative emission canister fasteners (1) and the evaporative emission canister (2).
    5. Fig 3: Evaporative Vent Solenoid Valve
    GM2188277Courtesy of GENERAL MOTORS CORP.
  5. Remove the evaporative vent solenoid valve (1) from the carbon canister.
scientia non olet · About LEMON Manuals