Camshaft Position Sensor Wire Replacement
WARNING: This page is about a different variant/trim than selected.
| Callout | Component Name |
|---|---|
| Preliminary Procedure: Lift and support the vehicle. Refer to Lifting and Jacking the Vehicle . |
|
| 1 | Camshaft Position Sensor Wire Assembly Fastener (Qty: 2)
CAUTION:
Refer to Fastener Caution
.
Tighten: 12 N.m (106 lb in) |
| 2 | Camshaft Position Sensor Wire Assembly Procedure: Disconnect the electrical connectors. |