Air Cleaner Assembly Replacement

WARNING: This page is about a different variant/trim than selected.

Fig 1: Air Cleaner Assembly

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure Remove the mass airflow sensor. Refer to Mass Airflow Sensor with Intake Air Temperature Sensor Replacement . Disconnect the outlet duct from the air cleaner assembly. Refer to Air Cleaner Resonator and Outlet Duct Replacement .
1	Air Cleaner Assembly Fastener (Qty: 2) CAUTION: Refer to Fastener Caution . Tighten: 9 N.m (80 lb in)
2	Air Cleaner Assembly

Callout

Component Name

Preliminary Procedure

Air Cleaner Assembly Fastener (Qty: 2)

CAUTION: Refer to Fastener Caution .

Tighten: 9 N.m (80 lb in)

Air Cleaner Assembly