Vehicle Speed Sensor Replacement

WARNING: This page is about a different variant/trim than selected.

Fig 1: Vehicle Speed Sensor

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle Remove the transmission support. Refer to Transmission Mount Replacement Lower the rear of the transmission.
1	Vehicle Speed Sensor Bolt CAUTION: Refer to Fastener Caution . Tighten: 8 N.m (71 lb in)
2	Vehicle Speed Sensor Procedure: Disconnect the electrical wire harness from the vehicle speed sensor.

Callout

Component Name

Preliminary Procedures

Vehicle Speed Sensor Bolt

CAUTION: Refer to Fastener Caution .

Tighten: 8 N.m (71 lb in)

Vehicle Speed Sensor
Procedure:
Disconnect the electrical wire harness from the vehicle speed sensor.