5th/6th Gear Synchronizer
WARNING: This page is about a different variant/trim than selected.
- Apply lubricant and install the following components into the 5th/6th synchronizer hub (124/118):
- The 5th gear blocking ring (121b)
- The 6th gear blocking ring (121a)
Refer to Adhesives, Fluids, Lubricants, and Sealers .
- Apply lubricant to the blocking ring, driven gear and sleeve. Install the following components into the reverse gear (206):
- The reverse gear insert (120) and the spring (195)
- The reverse gear blocking ring (122)
- The reverse driven gear (112)
- The synchronizer sleeve (125)
NOTE:
Ensure that the hub slides easily.