LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Camaro LS, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Manual Transmission - AISIN AY6) >> Diagnostic Information and Procedures >> DTC P0806 >> Circuit/System Testing

Circuit/System Testing

WARNING: This page is about a different variant/trim than selected.
  1. Ignition OFF, disconnect the harness connector of the CPP sensor.
  2. Ignition ON, observe the scan tool CPP sensor voltage parameter for 0.1 V.
    • If less than the specified value, replace the CPP sensor.
scientia non olet · About LEMON Manuals