LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Camaro LS, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Manual Transmission - AISIN AY6) >> Description and Operation >> Transmission System Description and Operation >> 1st Gear Power Flow >> 1st Gear

1st Gear

WARNING: This page is about a different variant/trim than selected.

Moving the 1st/2nd shift fork (210) forward moves the 1st/2nd synchronizer sleeve (170). The synchronizer sleeve (170) slides on the synchronizer hub. The inner teeth on the synchronizer sleeve push against the synchronizer ring teeth, causing the synchronizer rings to contact, and the 1st gear (110) and the countershaft to match speeds. The synchronizer sleeve (170) then engages the selector teeth on 1st gear (110). The synchronizer hub is pressed on the countershaft (400). Power flow is now from the input shaft (100) to the 1st gear (110), through the synchronizer to the countershaft (400) and to the output shaft (150).

scientia non olet · About LEMON Manuals