LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Camaro LS, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 15 (Engine Mechanical - 6.2L - Repair Instructions - Off Vehicle (2 Of 3)) >> Engine Oil Cooler Assemble

Engine Oil Cooler Assemble

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Identifying Coolant Fitting & Seal
    GM2054200Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Engine Oil Cooler Debris Caution .
  1. Install a NEW coolant fitting seal (2).
    2. CAUTION: Refer to Fastener Caution
  2. Install the coolant fitting (1) and tighten to 35 N.m (26 lb ft).
    3. Fig 2: Identifying Oil Cooler Core Components
    GM2054197Courtesy of GENERAL MOTORS CORP.
  3. Install the NEW oil cooler core seals (3).
  4. Install the oil cooler core (2).
  5. Install the oil cooler core bolts (1) and tighten to 25 N.m (18 lb ft).
scientia non olet · About LEMON Manuals