LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Camaro LS, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 11 (Engine Mechanical - 6.2L - Diagnostic Information And Procedures) >> Diagnostic Information and Procedures >> Engine Oil Level Sensor Diagnosis >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different variant/trim than selected.
  1. Verify proper engine oil level. Add oil as necessary.
  2. Ignition ON, observe the scan tool Engine Oil Level parameter. The reading should be OK and change to Low when the oil level sensor/switch harness connector is disconnected.