Circuit/System Verification

WARNING: This page is about a different variant/trim than selected.

NOTE: If an UXXXX DTCs are set, diagnose those first.

Engine idling, observe the EBCM DTC information with a scan tool. EBCM DTCs should not set.
- If a DTC sets, refer to Diagnostic Trouble Code (DTC) List - Vehicle for further diagnosis.
- If there are no EBCM DTCs set, refer to Symptoms - Antilock Brake System .
Operate the vehicle within the Conditions for Running the DTC to verify the DTC does not reset. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records data.