Clutch Pedal Position Sensor Replacement
WARNING: This page is about a different variant/trim than selected.
| Callout | Component Name |
|---|---|
| Preliminary Procedure: Remove the clutch pedal assembly from the vehicle. Refer to Clutch Pedal Replacement |
|
| 1 | Clutch Pedal Position Sensor Bolt
CAUTION:
Refer to Fastener Caution
.
Tighten: 2.5 N.m (22 lb in) |
| 2 | Clutch Pedal Position Sensor Procedure: Perform the clutch pedal position sensor learn procedure. For the V6 engine refer to Clutch Pedal Position Sensor Learn or Clutch Pedal Position Sensor Learn for the V8 engine. |