LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Camaro LS, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Manual Transmission Clutch System) >> Diagnostic Information and Procedures >> Clutch - No Load

Clutch - No Load

WARNING: This page is about a different variant/trim than selected.
Cause Action
DEFINITION: Regardless of ambient temperature and vehicle on/off operational status, the clutch pedal effort is zero/light in both up-stroke and down-stroke and the clutch will not disengage.
Review Symptoms - Clutch  and perform the necessary inspections.
Internal damage to the clutch master cylinder and the hydraulic system
  1. Inspect for fluid leaks.
  2. Replace the clutch hydraulic system. Refer to Clutch Master Cylinder Replacement  and Hydraulic Clutch Hose/Pipe Replacement .
  3. Replace the clutch master cylinder and the clutch actuator cylinder (CSC). Refer to Clutch Master Cylinder Replacement  and Clutch Concentric Actuator Cylinder Replacement (Aisin)  or Clutch Concentric Actuator Cylinder Replacement (Tremec) .
  4. Re-bleed the clutch hydraulic system. Refer to Hydraulic Clutch System Bleeding .