Hood Hinge Replacement

Fig 1: Hood Hinge

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Remove the hood. Refer to Hood Replacement . Remove the appropriate front fender. Refer to Front Fender Replacement .
1	Hood Hinge Bolt (Qty: 2) CAUTION: Refer to Fastener Caution . Procedure: Mark the location of the hinge to the hood and upper rail with a grease pencil to aid in alignment. Tighten: 25 N.m (18 lb ft)
2	Hood Hinge

Callout

Component Name

Preliminary Procedures

Hood Hinge Bolt (Qty: 2)

CAUTION: Refer to Fastener Caution .

Procedure:
Mark the location of the hinge to the hood and upper rail with a grease pencil to aid in alignment.

Tighten: 25 N.m (18 lb ft)

Hood Hinge