Fuel Tank Filler Pipe Housing Replacement
| Callout | Component Name |
|---|---|
| Preliminary Procedure: Remove the filler pipe. Refer to Fuel Tank Filler Pipe Replacement for the 2.8L, 3.0L, 3.2L, or 3.6L engine or Fuel Tank Filler Pipe Replacement for the 4.8L, 5.3L, 6.0L, 6.2L, or 7.0L engine. |
|
| 1 | Fuel Tank Filler Pipe Housing Retainer (Qty: 4) Procedure: Using a flat-bladed tool that fits into the 4 depression, break through the 4 depressions with light pressure and then pry the clips free to release the fuel tank filler pipe housing from the panel. Tip: The fuel tank filler pipe housing once removed cannot be reused and must be replaced with a NEW fuel tank filler pipe housing. |
| 2 | Fuel Tank Filler Pipe Housing Tip: Disconnect the electrical connector. |