Instrument Cluster Head Up Display Replacement

Fig 1: Locating Instrument Cluster Head Up Display

GM1853482

Courtesy of GENERAL MOTORS CORP.

Callout

Component Name

Preliminary Procedure:
Remove the instrument panel upper trim panel. Refer to Instrument Panel Upper Trim Panel with Windshield Defroster Nozzle Grille Replacement (Acadia w/RPO UV6) or Instrument Panel Upper Trim Panel with Windshield Defroster Nozzle Grille Replacement (Acadia w/o RPO UV6) or Instrument Panel Upper Trim Panel with Windshield Defroster Nozzle Grille Replacement (Enclave) or Instrument Panel Upper Trim Panel with Windshield Defroster Nozzle Grille Replacement (OUTLOOK) or Instrument Panel Upper Trim Panel with Windshield Defroster Nozzle Grille Replacement (Traverse) .

1

Head Up Display Module Bolt (Qty: 4)

CAUTION: Refer to Fastener Caution .

Tighten: 2 N.m (18 lb in)

2

Head Up Display Module Assembly

Procedures

Disconnect the electrical connections.
Refer to Control Module References for programming and setup information.