Liftgate Trim Panel Replacement (Enclave)

Fig 1: Identifying Liftgate Trim Panel (Enclave)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the liftgate window garnish molding. Refer to Liftgate Garnish Molding Replacement (without TB4) or Liftgate Garnish Molding Replacement (with TB5) .
1	Liftgate Trim Finish Panel Push Pin Retainer (Qty: 2)
2	Liftgate Trim Finish Panel Assembly Procedure Use a trim panel removal tool to aid in the removal of the trim panel from the liftgate assembly. Disconnect the electrical connector, if equipped.
3	Liftgate Trim Finish Panel Retainer (Qty: 6)
4	Liftgate Trim Finish Panel Clips (Qty: 2)