Radio Speaker Amplifier Replacement (With UQA/UQS)

Fig 1: Identifying Radio Speaker Amplifier (With UQA/UQS)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure:  Remove the left side instrument panel insulator panel. Refer to Instrument Panel Insulator Panel Replacement - Left Side (Acadia) or Instrument Panel Insulator Panel Replacement - Left Side (Enclave) or Instrument Panel Insulator Panel Replacement - Left Side (OUTLOOK) or Instrument Panel Insulator Panel Replacement - Left Side (Traverse) .
1	Radio Speaker Amplifier Screw (Qty: 3) CAUTION: Refer to Fastener Caution . Tighten:  2.5 N.m (22 lb in)
2	Radio Speaker Amplifier Assembly Procedure:  Disconnect the electrical connector.