Rear Seat Number 2 Retractor Side Belt Replacement

Fig 1: Identifying Rear Seat Number 2 Retractor Side Belt

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Disable the SIR system. Refer to SIR Disabling and Enabling . Remove the rear quarter upper trim panel. Refer to Quarter Upper Trim Panel Replacement (with TB5) or Quarter Upper Trim Panel Replacement (without TB4) . Remove the rear quarter lower trim panel. Refer to Quarter Lower Rear Trim Panel Replacement (Traverse with TB5) or Quarter Lower Rear Trim Panel Replacement (Traverse without TB4) or Quarter Lower Rear Trim Panel Replacement (Acadia/OUTLOOK with TB5) or Quarter Lower Rear Trim Panel Replacement (Acadia/OUTLOOK without TB4) or Quarter Lower Rear Trim Panel Replacement (Enclave with TB5) or Quarter Lower Rear Trim Panel Replacement (Enclave without TB4) .
1	Rear Seat Number 2 Shoulder Belt Anchor Bolt CAUTION: Refer to Fastener Caution . Tighten: 45 N.m (33 lb ft)
2	Rear Seat Number 2 Shoulder Belt Guide Adjuster Bolt Tighten: 45 N.m (33 lb ft)
3	Rear Seat Number 2 Shoulder Belt Retractor Bolt Tighten: 45 N.m (33 lb ft)
4	Rear Seat Number 2 Shoulder Belt Retractor Assembly