Seat Belt Retractor Replacement - No. 2 Right Rear

Seat Belt Retractor Replacement - No. 2 Right Rear

Removal Procedure

1. Remove the rear seat belt upper guide shoulder bolt.
2. Remove the right rear quarter trim panel. Refer to Rear Quarter Trim Panel Replacement - Right Side (Service and Repair)




3. Remove the rear seat belt lower anchor nut.
4. Remove the bolt that retains the seat belt retractor assembly to the body.
5. Remove the seat belt retractor assembly from the vehicle.

Installation Procedure




1. Install the seat belt retractor assembly to the vehicle.

Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the seat belt retractor assembly to the vehicle.

Tighten the rear seat belt retractor bolts to 70 Nm (52 lb ft).

3. Install the right rear quarter trim panel. Refer to Rear Quarter Trim Panel Replacement - Right Side (Service and Repair)
4. Install the rear seat belt lower anchor nut. Ensure that the seat belt webbing is not twisted.

Tighten the rear seat mounting nut to 45 Nm (33 lb ft).

5. Install the rear seat belt upper guide with the bolt. Ensure that the seat belt webbing is not twisted.

Tighten the bolt to 70 Nm (52 lb ft).