LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2009 >> TrailBlazer 2WD L6-4.2L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Service and Repair >> Overhaul >> Repair Instructions >> 89. Oil Level Indicator and Tube Installation

89. Oil Level Indicator and Tube Installation




Oil Level Indicator and Tube Installation




1. Install the oil level indicator tube.
2. Add sealant GM P/N 12346004 (Canadian P/N 10953480) to the oil level indicator tube stud threads.

Caution: Refer to Fastener Caution (Fastener Caution).

3. Install the oil level indicator tube stud. Tighten the oil level indicator tube stud to 10 Nm (89 lb in).
4. Install the oil level indicator.

scientia non olet · About LEMON Manuals