LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2009 >> TrailBlazer 2WD L6-4.2L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Service and Repair >> Overhaul >> Repair Instructions >> 71. Camshaft Cover Installation

71. Camshaft Cover Installation




Camshaft Cover Installation




1. Install a new camshaft cover seal.

Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the camshaft cover and bolts and tighten to 10 Nm (89 lb in).




3. Install new ignition control module seals.
4. Install the ignition control modules and bolts and tighten to 10 Nm (89 lb in).

scientia non olet · About LEMON Manuals