Radiator Vent Inlet Hose Replacement
Radiator Vent Inlet Hose Replacement
Removal Procedure
1. Partially drain the cooling system. Refer to Cooling System Draining and Filling (LL8) (Service and Repair)Cooling System Draining and Filling (LH6, LS2) (Service and Repair).
2. Remove the vent inlet hose from the radiator (2).
3. Remove the vent inlet hose from the surge tank (1).
Installation Procedure
1. Install the vent inlet hose to the surge tank (1).
2. Install the vent inlet hose to the radiator (2).
3. Fill the cooling system. Refer to Cooling System Draining and Filling (LL8) (Service and Repair)Cooling System Draining and Filling (LH6, LS2) (Service and Repair).