Transmission Support Fixture Assemble

Transmission Support Fixture Assemble

Special Tools
* J 3289-20 - Holding Fixture Base
* J 28664-B - Transmission Holding Fixture
* J 44465 - Holding Fixture Adapter (if required)

For equivalent regional tools, refer to Special Tools (Tools and Equipment).




1. Install J 44465 - fixture adapter (if required) onto J 28664-B - holding fixture.
2. Install J 28664-B - holding fixture onto the transmission.
3. Install the transmission and holding fixture into J 3289-20 - holding fixture base.
4. Insert the pin into J 3289-20 - holding fixture base in order to hold the transmission in the desired position.