Front Suspension

Stabilizer Shaft Insulator Replacement

Removal Procedure

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (Service and Repair).




2. Remove the left and right side stabilizer shaft insulator bracket bolts.
3. Remove the left and right side stabilizer shaft insulator brackets.




4. Remove the left and right side stabilizer shaft insulators (1) from the stabilizer shaft (2).

Installation Procedure




1. Install the left and right side stabilizer shaft insulators (1) to the stabilizer shaft (2).




2. Install the left and right side stabilizer shaft insulator brackets.

Caution: Refer to Fastener Caution (Fastener Caution).

3. Install the left and right side stabilizer shaft insulator bracket bolts.

Tighten the stabilizer shaft insulator bracket bolts to 42 Nm (31 lb ft).

4. Lower the vehicle.