96. Exhaust Crossover Pipe Installation

Exhaust Crossover Pipe Installation





Caution: Refer to Fastener Caution (Fastener Caution).

1. Install the exhaust crossover pipe studs (1) if necessary, and tighten to 25 Nm (18 lb ft).
2. Install the exhaust crossover pipe.
3. Install the exhaust crossover pipe nuts and tighten to 25 Nm (18 lb ft).




4. Install the exhaust crossover heat shield.
5. Install the exhaust crossover heat shield bolts and tighten to 10 Nm (89 lb in).