Diagnostic Starting Point - Antilock Brake System
WARNING: This page is about a different car, the 2008 GMC Yukon XL and 2008 Chevrolet Suburban. However, it is still accessible from the selected car via links, so may be relevant.
Begin the system diagnosis with Diagnostic System Check - Vehicle (without HP2) or Diagnostic System Check - Vehicle (with HP2) . The Diagnostic System Check will provide the following information:
- The identification of the control modules which command the system
- The ability of the control modules to communicate through the serial data circuit
- The identification of any stored diagnostic trouble codes (DTCs) and their status
The use of the Diagnostic System Check will identify the correct procedure for diagnosing the system and where the procedure is located.