Instrument Panel Cluster Trim Plate Cover Replacement (Except Cadillac)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Instrument Panel Cluster Trim Plate Cover Assembly & Screws

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Tilt the steering wheel to its lowest position. Remove the instrument panel left air deflector. Refer to Instrument Panel Outer Air Outlet Deflector Replacement - Left Side (Except Cadillac) . Remove the instrument panel center trim panel. Refer to Instrument Panel Center Trim Panel Replacement (Except Cadillac) .
1	Instrument Panel Cluster Trim Plate Cover Assembly Screws (Qty: 4) NOTE: Refer to Fastener Notice . Tighten: 2 N.m (18 lb in)
2	Instrument Panel Cluster Trim Plate Cover Assembly

Callout

Component Name

Preliminary Procedures

Tilt the steering wheel to its lowest position.
Remove the instrument panel left air deflector. Refer to Instrument Panel Outer Air Outlet Deflector Replacement - Left Side (Except Cadillac) .
Remove the instrument panel center trim panel. Refer to Instrument Panel Center Trim Panel Replacement (Except Cadillac) .

Instrument Panel Cluster Trim Plate Cover Assembly Screws (Qty: 4)

NOTE: Refer to Fastener Notice .

Tighten: 2 N.m (18 lb in)

Instrument Panel Cluster Trim Plate Cover Assembly