LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2009 >> Impala Police >> Repair and Diagnosis >> Transmission >> Hydraulic Diagrams >> Automatic Transmission - 4T65-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis >> Repair Instructions - On Vehicle >> 1-2 Shift Solenoid Valve Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Identifying 1-2 Shift Solenoid
    GM49377Courtesy of GENERAL MOTORS CORP.
  1. Install the 1-2 shift solenoid (315A).
  2. Install the 1-2 shift solenoid retaining clip (314D).
  3. Connect the 1-2 shift solenoid electrical connector.
  4. Install the case side cover. Refer to Control Valve Body Cover Replacement .
scientia non olet · About LEMON Manuals