LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2009 >> Impala Police >> Repair and Diagnosis >> Transmission >> Hydraulic Diagrams >> Automatic Transmission - 4T65-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis >> Repair Instructions - Off Vehicle >> Drive Shaft Oil Seal Assemble - Left Side >> Assembly

Drive Shaft Oil Seal Assemble - Left Side: Assembly

CAUTION: Install the seal onto the tool before installing into the case to prevent damage to the seal.
NOTE: When you remove a drive axle from the transmission for any reason, inspect the axle sealing surface (tripot shank) for corrosion. If corrosion is evident, clean the surface with a 320 grit cloth or equivalent. Clean off any remaining debris with automatic transmission fluid. Wipe the surface dry and reinstall the drive axle free of any build up.

Use J-34115:  seal installer in order to install the left side axle oil seal assembly (409).

scientia non olet · About LEMON Manuals